CBL - Campus del Baix Llobregat

Projecte llegit

Títol: Anàlisi, simulació i comparativa d'un radar altímetre FMCW versus un radar polsat durant la fase d'aproximació a la pista 06L a l'aeroport de Barcelona, el Prat (LEBL)


Estudiants que han llegit aquest projecte:


Director/a: BERENGUER I SAU, JORDI

Departament: TSC

Títol: Anàlisi, simulació i comparativa d'un radar altímetre FMCW versus un radar polsat durant la fase d'aproximació a la pista 06L a l'aeroport de Barcelona, el Prat (LEBL)

Data inici oferta: 06-03-2026     Data finalització oferta: 06-11-2026



Estudis d'assignació del projecte:
    GR ENG SIST AEROESP
Tipus: Individual
 
Lloc de realització: EETAC
 
Paraules clau:
Radar, Altímetre, FMCW, Radionavegació, Aproximació, Radar pulsat
 
Descripció del contingut i pla d'activitats:
Es tracta d'analitzar l'estat de l'art dels radars altimètrics embarcats de tipus FMCW en comparació a la utilització de radars polsats per aquesta funció.

Es faran simulacions sobre el comportament d'ambdós sistemes utilitzant Matlab i el model digital del terreny en les maniobres d'aproximació en aeròdroms reals, analitzant les avantatges i els inconvenients de cada sistema, i els punts més crítics i solucions de millora.
 
Overview (resum en anglès):
This project consists of carrying out an analysis, simulation and comparative study of two different altimeter radars during the ILS (Instrument Landing System) approach phase on runway 06L at Barcelona Airport, El Prat (ICAO code: LEBL).
The two technologies selected for the study are pulse radar and continuous wave frequency modulation (FMCW) radar. The first measures the height based on the time that elapses between the emission of the signal and the reception of the signal reflected by the surface. On the other hand, the second transmits a signal continuously and determines the height based on the difference in frequency between the transmitted and received signal.
First, a theoretical study is carried out in which the operation of the two technologies is explained, their block diagrams and the measurement principles they use to determine the height of the aircraft with respect to the ground.
Next, to make the simulations as realistic as possible, terrain data provided by the Cartographic and Geological Institute of Catalonia (ICGC) are used. Based on these data, the reflectivity of the two main surfaces overflown, the sea and urban areas, are studied, and the measurement error is characterised in terms of timing uncertainty for the pulsed radar and beat frequency uncertainty for the FMCW radar.
Finally, the results obtained are compared by considering parameters such as transmitted and received power, the signal-to-noise ratio (SNR), and the error in the measured altitude. This comparison makes it possible to identify the differences between the two technologies and analyse the factors that influence their performance during the approach phase. In addition, a sustainability study is carried out to assess the environmental impact associated with both technologies, and the conclusions are drawn based on the simulation results and the sustainability analysis.


© CBLTIC Campus del Baix Llobregat - UPC