Projecte llegit
Títol: Desenvolupament d'una eina per a mesurar prestacions en WLAN
Estudiants que han llegit aquest projecte:
CAZALLA SÁNCHEZ, ORIOL (data lectura: 30-10-2026)- Cerca aquest projecte a Bibliotècnica
CAZALLA SÁNCHEZ, ORIOL (data lectura: 30-10-2026)Director/a: CASALS IBÁÑEZ, LLUÍS
Departament: ENTEL
Títol: Desenvolupament d'una eina per a mesurar prestacions en WLAN
Data inici oferta: 10-02-2026 Data finalització oferta: 10-10-2026
Estudis d'assignació del projecte:
GR ENG SIS TELECOMUN
GR ENG TELEMÀTICA
| Tipus: Individual | |
| Lloc de realització: EETAC | |
| Paraules clau: | |
| WLAN, Wi-Fi, mesura de prestacions, IEEE 802.11ac, Linux | |
| Descripció del contingut i pla d'activitats: | |
| Desenvolupament d'una aplicació base per a mesura de prestacions (thougput, retard, jitter) en un entorn de cominicacions Wireless LAN (WLAN).
Es planteja un estudi de les condicions de funcionament dels components software (controladors) de les interfícies WLAN i opcions disponibles des del sistema operatiu (prioritàriament de tipus Linux) per al seu ús i control. A partir d'aquí es dissenyarà una aplicació que permeti dur a terme la configuració i el control de la interfície de xarxa WLAN amb l'objectiu de fer mesures específiques de prestacions en la comunicació entre dos terminals o equips finals. |
|
| Overview (resum en anglès): | |
| Wi-Fi has become the last hop between most users and the network, and much of the quality they perceive depends on it. However, the performance of a wireless link is hard to predict, as it depends on factors such as signal level, channel occupancy, channel width, transmit power or the power-saving mode of the network card. Current measurement tools address this issue only partially. Active measurement tools such as iperf3 report throughput and delay but not the radio conditions under which they were obtained, whereas WLAN diagnostic tools describe the radio medium without measuring traffic between two devices. That is why the purpose of this project is to develop and validate an active measurement tool that links each result to the radio state of the interface and allows these conditions to be changed from the same application. The tool was written in Python directly on sockets, following a client-server model, and controls a managed access point through its controller API. It was tested in a real home environment with 275 measurements across 27 scenarios**, varying the band, channel, channel width, access point power, number of hops and power saving,** and was validated against iperf3 and ping. Key findings show close agreement with iperf3 in throughput and confirm that radio context is necessary to correctly interpret several scenarios. They also confirm that, when relayed through the access point, traffic crosses the air twice and throughput drops to roughly half. Moreover, they show the importance of measuring several metrics at once: power saving, for instance, leaves throughput unchanged but multiplies delay by nine. As a result, the project provides a tool that combines radio configuration, performance measurement and context logging in a single workflow, with direct applications in teaching and in the management of small networks. | |